Quote:
Originally Posted by Steve-W
Sorry for the late update.
the problem turned out the be the fusible link.
Question: How do I find where the fusible link breaks, heads up: this is an EZ wire 12 harness.
|
What I mostly found with the fusible links are, that they “burn” inside giving a very bad contact or none at all. As if a normal fuse is blown.
Also had a bad contact once where the link was attached to the wiring of the car, but then we bad contact, sometimes contact, sometimes not. This was hard to find. Just after striping the insulation and measuring resistance we found the problem.
Maybe you can point it out with an Ohm-meter, just measure the wires one by one.
Succes!