the dome light wireing harness is white and orange. under your dash the white and orange wires have a plug in and just unplug that plug, put a orange wire to go from orange on one plug to orange on the other, and white wire should come out one plug, split to each switch, and to the other plug, you should just go pick up the little harness from a junkyard and it is easy to figure out, by the way, if you are drilling holes for the switches, you need a pipe thread tap. number 8 pipe? no, i dont know, good luck, Ben
__________________
Brandon, SD
69 GMC 1/2 ton 2wd
wide long bed with wood
3 on the tree
350 engine 4 bolt main
rv cam
AIM = Alphray04
|