Re: Gear swap Axle troubles
""(If it is a direct swap for center section there must be something going on with the spline in the spider gear such as dried up muddy gear oil?)""
Axle won't be in the spider gear....itd be in the side gear....
Try the other axle in that side and see how far it goes in ...mark/measure it and compare engagement depth of the 2 axles...if they're the same then I'd be looking at the side gear in the diff...but you can pull the cover and maybe see it as well...
Are the axle splines clean?...I've seen gunk/rust buildup in splines before as well.....
Last edited by mongocanfly; 01-26-2019 at 04:38 PM.
|