The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 01-27-2019, 12:34 PM

Go with the same thought as the over all size of the shop. The bigger the door the better. Heck do away with the man door are put it on the other end in the old garage door. Just swap them out if you can with a little help I'm sure that you could do it in a weekend.
Buy a door opener for the garage door so you can open it from the house as you walk towards it are have the code box installed on the backside some place.

01-27-2019, 12:34 PM	#11
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Reconfiguring my little shop ... maybe. Go with the same thought as the over all size of the shop. The bigger the door the better. Heck do away with the man door are put it on the other end in the old garage door. Just swap them out if you can with a little help I'm sure that you could do it in a weekend. Buy a door opener for the garage door so you can open it from the house as you walk towards it are have the code box installed on the backside some place. __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.