Quote:
Originally Posted by TruDom
im running ridlers at the sizes your looking at on a 70 fleetside with the wider of the 12 bolt rear ends. 57" backing plate to backing plate
running 275/40/20... i think there is enough room for 295/40 but again this is the wider rear end.
axle width is 55.5 wide with 30.5 long axles on the narrow rear end. earlier rear end
axle width is 57 wide with 31 5/16 long axles on the wider rear end. later rear end
this site is helpful in seeing sidewall measurements and what fits on rims https://www.rimsntires.com/specspro.jsp |
That website is pretty dang cool, I'm going to have to bookmark that.
Up front I'm running ridetech strongarms and cpp drop spindles/big disc package so everything should be fine up there. The 245/45s should buy me a little bit of extra room but still be able to have some sidewall.
I'll have to make some spacers for the rear but shouldn't be a big deal. Once I get them in I'll get some measurements to try to get everything where it needs to be.
Thanks a lot for the feedback!