|
Re: Columbus..the 1957 IH 4x4..
all right..1st off ..don't laugh at my engineering...
I finally got all the fittings in for the hyd clutch setup..
im needing to figure out the pedal to clutch release ratio..
this is all I could come up with...
I made a TEMPORARY bracket for the master cylinder....the clutch rod hooks to the arm out front..the lifting action will push in on the master cyl....
I made the brackets with lots of adj holes so I can move the master up or down the "ladder" and change the ratio of the pedal until I get it where I like it....once I find the sweet spot I WILL build a new bracket that I promise will look better than this conglomeration....
|