The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

dsraven · 02-15-2019, 10:46 AM

how about on the whoop de whoop if you gat a hammer and dolly and hammer on dolly the weld area so it expands and takes the warp out. the warp is usually from too much heat in a concentrated area and then it cools down and shrinks that spot. if you can expand it back, by hammer on dolly, then it will be closer. when you weld also hammer on dolly when it is still red to expand the metal some so it cools and shrinks closer to what you want.

02-15-2019, 10:46 AM	#186
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,874	Re: Wife's 48 how about on the whoop de whoop if you gat a hammer and dolly and hammer on dolly the weld area so it expands and takes the warp out. the warp is usually from too much heat in a concentrated area and then it cools down and shrinks that spot. if you can expand it back, by hammer on dolly, then it will be closer. when you weld also hammer on dolly when it is still red to expand the metal some so it cools and shrinks closer to what you want.