The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*randy500* · 03-10-2019, 10:37 PM

Its definitely worth it and I think you will be very proud of it when its on the road.

I used 1st gen dodge diamond eye 4" exhaust on my truck. I cut and clocked a few straight sections, one by the trans before the transfer case and one over the axle and one tailpipe bend.
It cleared the transfer case and frame which is the tightest spot.
Nice exhaust for about $300.
You have the low mount turbo so maybe a little more work and you will need a turbo flange I think.

03-10-2019, 10:37 PM	#182
randy500 Account Suspended Join Date: Jul 2016 Location: Tacoma, WA Posts: 6,873	Re: K30 Downgrade to Cummins Project Its definitely worth it and I think you will be very proud of it when its on the road. I used 1st gen dodge diamond eye 4" exhaust on my truck. I cut and clocked a few straight sections, one by the trans before the transfer case and one over the axle and one tailpipe bend. It cleared the transfer case and frame which is the tightest spot. Nice exhaust for about $300. You have the low mount turbo so maybe a little more work and you will need a turbo flange I think.