Quote:
Originally Posted by TA_C10
Ok, just went out and pulled my measurements and here is what I got:
1970 cab and frame
Front = 40 13/16
Rear = 37 5/8
What I did was used a tape measure, but to be more accurate I skipped the first inch and started on the 1" mark on tape, and then found my measurement. It was easier to line up that 1" mark line than trying to figure out the metal tip on the end of the tape 
I then measured my frame it is very close to the same measurements as my cab. Only an 1/16 to 1/8 inch difference from frame to cab.
Hope that helps!
 |
Thanks that does help. So your cab is very close to mine and some are an inch bigger. That is interesting. I went out and meausered my frame today and everything looks like it will be bang on, so that is a relief.