Re: 69 K10 From the Field
Also was able to remove all the wiring harness when I striped the cab. I have a new AAW Classic Update 510089 kit on its way. Cab is ready for one more complete cleaning now that there is nothing left inside. Once it is clean I will make a few rust repairs and get it ready for paint. Firewall to back of where the gas tank goes will get a stick on weather/sound underlayment. I will treat the cab corners once they are cleaned out well and surface rust is addressed with a rust reformer and coat of rusty metal primer.
Was also able to start tearing down the long bed I bought a few days ago. Still have one more side to remove all the bolts from. It is a tiring process when doing it by yourself. I do a combination of removing if possible, on about 1/3 of the bolts on the bottom I just cranked up the Rigid impact drill and broke a bunch off. Most of the metal is good on this bed and will be used for two or three different projects. The bedside on passenger side has a nice dent that I want to challenge myself to remove.
|