The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**First c10** · 04-04-2019, 12:30 AM

Spring is around the corner for Utah. Time to put the patio furniture out also then the truck will be freed.

Got out the wire wheel and rotoloc scotchbrites to smooth the welds and then polish on the bench top buffer. I forgot to take a picture of it before installation but I was excited how good it turned out so I installed it.

First picture is from the driver side and the second is the passenger side.
I tried to take a picture from the front but it’s tucked under the intake tubing.

04-04-2019, 12:30 AM	#818
First c10 Registered User Join Date: Dec 2012 Location: Los Banos CA Posts: 2,705	Re: Project 68 k10 LWB..aka "The Hulk" Spring is around the corner for Utah. Time to put the patio furniture out also then the truck will be freed. Got out the wire wheel and rotoloc scotchbrites to smooth the welds and then polish on the bench top buffer. I forgot to take a picture of it before installation but I was excited how good it turned out so I installed it. First picture is from the driver side and the second is the passenger side. I tried to take a picture from the front but it’s tucked under the intake tubing. Attached Images __________________ 1956 Chevy Bel Air 2 door 1956 Chevy 210 4 Door 1970 K20 LWB project the Hulk build w/Supercharged 4.8L-ly2/4L60E HULK BUILD 1970 C10 Yellow/White Deluxe LWB w/ 5.3L-LC9/6L80E 1968 K10 LWB Dark green my son calls it "THE HULK Jr"HULK JR SOLD GO GO!!!