Quote:
Originally Posted by joedoh
seeing how low your cab is on the frame, it looks like they just bolted it down with no mounts. which makes me wonder why they have such a big notch in the back, I would bet the truck would lay running boards without the axle even coming near the frame. maybe the truck was a lowered s10 before the swap, I have seen guys do that before.
that cab corner is a mess, make sure you have lots of ventilation when you weld in the patch, that foam is gonna STINK.
|
Judging from the notched frame in the rear and the welded washers on the control arms in the front (and the fact that the control arms were notched for articulation), I think it had hydraulics in a past life.
