The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 Frame swap Trailblazer/Taskforce

dsraven · 05-19-2019, 06:04 PM

your pics never came through.
I am using the inline 6 in mine. it is too long to fit the original rad support and have clearance between the engine/rad with the a/c condensor. I ended up fabbing my own rad support and the filler under the grille. not that tough. use the envoy/trailblazer rad and hoses. use an electric fan on the back side of the rad. make your own rad support mounts on the dropped envoy/trailblazer frame. the frame needs to be dropped to clear the rad support and be the correct height for the front bumper anyway.

05-19-2019, 06:04 PM	#10
dsraven Registered User Join Date: Nov 2010 Location: calgary alberta Posts: 7,857	Re: Frame swap Trailblazer/Taskforce your pics never came through. I am using the inline 6 in mine. it is too long to fit the original rad support and have clearance between the engine/rad with the a/c condensor. I ended up fabbing my own rad support and the filler under the grille. not that tough. use the envoy/trailblazer rad and hoses. use an electric fan on the back side of the rad. make your own rad support mounts on the dropped envoy/trailblazer frame. the frame needs to be dropped to clear the rad support and be the correct height for the front bumper anyway.