The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**mongocanfly** · 06-03-2019, 06:22 PM

Another project off the list...the inner fender had a hump in the lower portion where the old steering box crossed over the top of the frame...the sharpie mark is about where the hump center needs to be..
.with the new steering the location moved forward a few inches...so I cut out a section of the panel and moved the hump forward about 1-1/2"...had to cut it in 5 pieces to work around the rib..i shortened the rib a inch or so and fabbed a filler for one spot...I'll blast it ,epoxy, and filler and it'll be good with painting and undercoating

06-03-2019, 06:22 PM	#539
mongocanfly Post Whore Join Date: May 2015 Location: Alabama Posts: 14,604	Re: Columbus..the 1957 IH 4x4.. Another project off the list...the inner fender had a hump in the lower portion where the old steering box crossed over the top of the frame...the sharpie mark is about where the hump center needs to be.. .with the new steering the location moved forward a few inches...so I cut out a section of the panel and moved the hump forward about 1-1/2"...had to cut it in 5 pieces to work around the rib..i shortened the rib a inch or so and fabbed a filler for one spot...I'll blast it ,epoxy, and filler and it'll be good with painting and undercoating Attached Images __________________ Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver Last edited by mongocanfly; 06-03-2019 at 06:31 PM.