The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Mattchu60 · 06-11-2019, 11:33 AM

That is interesting. So what happens if you have a truck with a frame swap - which is pretty common on these things (mine is swapped, as original was rotten from years in the midwest salt)? It sounds like your saying that CA will not allow it.

Not sure if this helps, but on my 2wd c10 (not a crew cab obviously) the frame stamp is on the driver side, under the door area. Its actually blocked from view by the driver side gas tank.

06-11-2019, 11:33 AM	#8
Mattchu60 Registered User Join Date: Jan 2014 Location: Swaledale, IA Posts: 485	Re: 1988 R30 VIN Frame Location(s)? That is interesting. So what happens if you have a truck with a frame swap - which is pretty common on these things (mine is swapped, as original was rotten from years in the midwest salt)? It sounds like your saying that CA will not allow it. Not sure if this helps, but on my 2wd c10 (not a crew cab obviously) the frame stamp is on the driver side, under the door area. Its actually blocked from view by the driver side gas tank.