Okay, I just realized upon looking at the filter that is in the intake breather (goes to the valve cover from the intake breather) was completely clogged up with gunk. I did a temp fix, removing the old filter material and put in a scotch-brite pad cut in half.
I think with that pathway breathable now and I could put one of those breather fill caps like Grumpy Old Man has on one of his 292 pics and that may help solve the issue. I think one of those caps would keep the pressure/heat down a little as not to aid in oil getting up through pcv tube. Thoughts?
As far as solving the problem with a baffle I also found this tube baffle that may work, but as usual no one has measurements on their spec page....
https://www.summitracing.com/parts/n...2074/overview/