Quote:
Originally Posted by Grumpy old man
yes , CCW = backing it out = lefty loosey
CW = turning it in = righty tighty
turn the mixture screw IN CW until lightly seated , Then back it out 2 complete turns .
2 weeks ago you posted
" Once I get this all back together and it runs I will put new points/condenser and probably a cap on it. Recheck dwell after that."
Did you ever replace the points and set gap/dwell ?
|
No my plan was to put the carb kit in and make sure that every thing went well before adding in too many variables (areas i could screw up). Before I did the carb work it would run, gas without stutter but smoke you out.