Firewall update - smoothed
Couldn't stand it, had to do the other side of firewall. Factory had these huge divots from the spot welds so I just simply filled in all those divots. It looks much better than it did. Not by any means perfect...
I used self leveling seam sealer(what i had left over from the roof drip rail) and I was able to make it all the way from left to right, but it wasn't quite full enough so I let 4 hours pass to let it cure completely then used the solids seam sealer and topped it all off with that. Hopefully that is ok to do, not sure why it would be a problem.
I also used the solids seam sealer in the drip rails and filled in some of the little dips/divots. I also had a couple inches right above the drivers door that never really cured on top, it stayed sticky, so I topped that off and smoothed it out. It has all cured nicely now and feels great, and water won't sit in those little divots, this satisfies me.
:chevy;