The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1967 GMC V6

Blue Sage · 07-03-2019, 02:31 PM

MJN - That's great thank you a lot. That's basically what I need - head, rod and manifold torques. I'm going to just hone the one damaged cylinder with a bottle brush and put it all back together and test the compression and see what I learn. I have my doubts this engine can ever get decent mileage - the cylinders are 4 and a half inches wide! and the intake feeds two cylinders at once - so, pretty inefficient.
Hey! Thanks!

07-03-2019, 02:31 PM	#7
Blue Sage Registered User Join Date: Jun 2019 Location: Taos, New Mexico Posts: 22	Re: 1967 GMC V6 - 351E on a Camper Cruiser MJN - That's great thank you a lot. That's basically what I need - head, rod and manifold torques. I'm going to just hone the one damaged cylinder with a bottle brush and put it all back together and test the compression and see what I learn. I have my doubts this engine can ever get decent mileage - the cylinders are 4 and a half inches wide! and the intake feeds two cylinders at once - so, pretty inefficient. Hey! Thanks!