[dug224]

As I attempt to find an affordable AC system, I continue to fill in with the little stuff. Somehow ended up with a pretty nice engine cover. Not sure where it came from but I got it mounted. Barry's U Pull It provided the front studs that the cover clips over and the rear plate (barely in the photo at the top) that grabs the back of the cover. I had to fabricate a small plate on which to mount the studs since this cover was definitely not meant for this engine. The cover cleaned the messy engine right up. I ended up with about 1/2" of clearance between the cover and hood structure. I need to work on moving the eye sore yellow filter down somewhere on the passenger side. I'll wait until I get the AC in since there's a lot of AC/Heat stuff going on in the area.