|
Re: Where do the pedal wires go? Gen IV
Kipps, good news. I just checked my sliced off piece of pedal/brake wiring harness. My pedal plug looks just like your pic in post 6 and all 6 wire colors correspond. (YAY!) It should be as easy as running them to the corresponding pins on the X1 connector.
The brake switch plug has 4 wires:
l.blu w/ white …. corresponds with pinout printout- X1 connector, pin 9
org w/ wh
pink
purple
I assume the last 3 are for the brake lights circuit.
There are 10 wires in total at the sliced end of the harness and two wires are purple.
|