[Matt_50]

I ordered a new neutral safety switch. I have some female terminals but I dug through the donors wiring and found the plugs off of it. The one between the start wire had a piece in it. Not sure if it was a bypass piece or just broke off the old switch but black part felt rubbery. See pictures.

The plugs and wires from the 84 c10 harness still look good so I figured it was safe to splice them into my new harness. I haven't yet, thought I'd get yalls opinion. The start wire on my wiring goes to a ford starter solenoid on the firewall that will power the gm starter solenoid on the starter.


The EZ harness has green wires for the back up lights, just dangling under dash right now. But the starter wire goes straight from ignition switch to the solenoid. In the box are two separate wires. A neutral safety switch wire and a instrument panel wire.