|
Torq converter help
I have a 68 K20 with a 350/th350 combo. I picked up the transmission without a torque converter and needing help on the right one. I like the B&M converters but curious as to what stall. Here is what I’m working with for a cam and gear ratios.
Lift
.450 intake .460 exhaust
Duration
222° intake, 222° exhaust @ .050" tappet
Centerline
114° ATDC intake, 114° BTDC exhaust
Rpm Range
2000-6000
Dana 44 14 bolt
4.10 ratio
Also any insight on how you decide this information. I’ve always just went 500rpm over the low end cam range but I know weight of vehicle and gear ratio play a factor. Thanks
|