The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

sweetk30 · 07-30-2019, 07:53 PM

well 2 of you guys were tering up others threads at the same time asking the same basics so i got mixed up on who was who .

so here ya go from the other thread i posted in .

1ton down is setup for 2.75" wide stock leafs . aftermarket like lift kits go 2.5" you cant cut in the the housing for 3" wide unless you do a home brew u-bolt conversion as you will loose the 2 bolt holes for the spring plate .

the width for a dana 60 front is 32" center to center .
the 1ton rear for a 14ff is 40.5" center to center and 2.5" wide springs .

the rear can be worked around a bit but the front has the pass side spring mount cast in to the diff housing .

07-30-2019, 07:53 PM	#16
sweetk30 Registered User Join Date: May 2012 Location: horseheads,ny rust belt Posts: 2,794	Re: 1969 C50 4x4 Axle Swap? well 2 of you guys were tering up others threads at the same time asking the same basics so i got mixed up on who was who . so here ya go from the other thread i posted in . 1ton down is setup for 2.75" wide stock leafs . aftermarket like lift kits go 2.5" you cant cut in the the housing for 3" wide unless you do a home brew u-bolt conversion as you will loose the 2 bolt holes for the spring plate . the width for a dana 60 front is 32" center to center . the 1ton rear for a 14ff is 40.5" center to center and 2.5" wide springs . the rear can be worked around a bit but the front has the pass side spring mount cast in to the diff housing . __________________ 77-k30lb BIG truck build . 87-k30lb budget beater build . 85-k30lb the plow machine build . 85-c10sb summer fun toy . ----------------------------- HOLLEY SNIPER efi = worst case of p.i.t.a i ever had . EDELBROCK pro flo 4 = best deal going so far . love my setup works great.