|
Re: 292 Questions
I took a reading on the ignition coil: Primary was 1.8 and secondary resistance was 9860 ohms. Both are high according to the tune up chart. I honestly don't know enough to know if that is a problem. I let it idle for about 15 minutes and took it around the yard. With the engine temp warmed up the coil read 112F with my temp gun.
Out of the three multi-meters I have, non have a setting for microfarad so I cant test my distributor condenser that I know of. The tune up chart calls for . 18-.23 microfarad. I took out the new one and put in the old one and there is no difference. Truck stumbles out if you try and give it much gas at all as it did before.
I put it in neutral and plugged in the vac gauge. At idle its reading about 22 but as soon as I give it gas the vac drops quickly down to 0.
|