Re: Columbus..the 1957 IH 4x4..
So what's a guy to do?...make my own...so here it is..I started with a couple pieces of 6in od aluminum..then I used some 6x8 aluminum tube to add a outer ring..I pressed the 6x8 ring on the solid chunks to form a flange...v-d out the seam on the lathe and then welded the v solid..this formed the start of the flange...then a whole lot of lathe work and I had it ruffed out..
Last edited by mongocanfly; 08-02-2019 at 05:05 PM.
|