Re: '70 C/10 The Needy Beast
Got the upper and lower control arms on, and got the right spindle and rotor assembly on and all fasteners torqued to spec. Progress is progress, but I don’t know if I will be able to take it for a drive before the snow flies or not. Still have to finish the front suspension and put the engine and trans back in, but first I need to get the trans rebuilt and get the heads fixed and back on. The engine developed a miss, so I pulled the heads off thinking I would find a burnt valve. Turns out number 8 exhaust valve seat had sunk. So I took them to work but it’s so busy in the machine shop they have not had a chance to get to them.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast"
200,000 Mile Club
Disc Brake Club
Owner installed options:
Front Sway Bar
Power Steering
Power Brakes
Cigar Lighter
Courtesy Lights
Deluxe Side Markers
Wiper Delay
Power windows
Power Locks
Sniper EFI
2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear
Last edited by 70STOVEBOLT; 10-06-2020 at 04:08 PM.
|