The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

kljfamily · 08-25-2019, 08:59 AM

Turns out the actuators in fact different. The 02 has more of a square rounded head head and the 03 has more of a star bit gear looking piece. Also it looks like the bolt pattern is slightly different on the actuator to the back case.

Soooooo...I'm going to rip apart the 02 and see if I can scavenge the internals. Not sure exactly how i'm going to proceed until I get in there and see what is what. I may be able to use the rear half off the 02. I have the 03 case soaking right now.

Once i get the 02 apart and I can my attack from there.

So new plan is 1. take apart 02 2.compare internals 3. Frankenstien a case together.

08-25-2019, 08:59 AM	#6
kljfamily Registered User Join Date: Sep 2014 Location: Albuquerque NM Posts: 98	Re: 2003 transfer case parts Turns out the actuators in fact different. The 02 has more of a square rounded head head and the 03 has more of a star bit gear looking piece. Also it looks like the bolt pattern is slightly different on the actuator to the back case. Soooooo...I'm going to rip apart the 02 and see if I can scavenge the internals. Not sure exactly how i'm going to proceed until I get in there and see what is what. I may be able to use the rear half off the 02. I have the 03 case soaking right now. Once i get the 02 apart and I can my attack from there. So new plan is 1. take apart 02 2.compare internals 3. Frankenstien a case together.