The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 08-30-2019, 10:15 PM

Dropped off the 2 intakes and the shop owner told me they would be $35.00 each to be blasted and cleaned. I was a happy guy. Got to the shop and pushed the truck up to the garage door to pressure wash it. We sprayed it down good late this afternoon with degreaser and oven cleaner. Letting it sit over night and will spray it again in the am and start pressure washing all of it.

Got the Elderbrock carb back today after a complete rebuilding of it and fixed the throttle shaft on it. The linkage is tight as it was when new now.
Ordered a gas tank to go out back inside the frame rails through Carolina Truck Shop in Spartenbugh SC today also.

Matt & Paul members here opened this shop up in SC.

https://www.carolinatruckshop.com/

08-30-2019, 10:15 PM	#6
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Dropped off the 2 intakes and the shop owner told me they would be $35.00 each to be blasted and cleaned. I was a happy guy. Got to the shop and pushed the truck up to the garage door to pressure wash it. We sprayed it down good late this afternoon with degreaser and oven cleaner. Letting it sit over night and will spray it again in the am and start pressure washing all of it. Got the Elderbrock carb back today after a complete rebuilding of it and fixed the throttle shaft on it. The linkage is tight as it was when new now. Ordered a gas tank to go out back inside the frame rails through Carolina Truck Shop in Spartenbugh SC today also. Matt & Paul members here opened this shop up in SC. https://www.carolinatruckshop.com/ __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.