The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - What did you do to your truck today.The 3rd chapter

Andy4639 · 08-30-2019, 10:23 PM

I ordered new trim for my ramp truck this past week. So I decided to see how hard the trim removal would be. It turned out not being bad at all.

The drivers side was gone and only had the 3 screws to get out. I used my saws all on them and the passenger side they came right off. I even saved the wedges for inside the fender for the new trim. I took the trim piece and straightened it best I could.
I may end up putting the new trim on my daughter's truck and using her old trim on the ramp truck.

08-30-2019, 10:23 PM	#804
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: What did you do to your truck today.The 3rd chapter I ordered new trim for my ramp truck this past week. So I decided to see how hard the trim removal would be. It turned out not being bad at all. The drivers side was gone and only had the 3 screws to get out. I used my saws all on them and the passenger side they came right off. I even saved the wedges for inside the fender for the new trim. I took the trim piece and straightened it best I could. I may end up putting the new trim on my daughter's truck and using her old trim on the ramp truck. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.