Re: TA_C10: Stage 1
Quote:
Originally Posted by TA_C10
Update - H-Pipe - Exhaust Wrap
Finished the H-Pipe and painted all the welds with high-temp primer and paint. I just used some VHT Flame Proof aluminum color from AZ rated at 2000 degrees. I've used it before on headers and it does pretty decent.
I bought some DEI 2" exhaust wrap for my headers. It turned out ok. We shall see how long it lasts. I had a real problem cutting these straps to the proper length on the drivers side. Passenger side I finally figured it out a little better. This stuff came with a high temp silicone spray. I sprayed it on the passenger side. It's black color which really makes the black wrap look good but I doubt it lasts long. You can see in one of my pics the difference between the color with/without the silicone spray.
|
Turning out VERY nice!
__________________
67SWB-B.B.RetroRod
64SWB-Recycle
89CCDually-Driver/Tow Truck
99CCSWB Driver
All Fleetsides
@rattlecankustoms in IG
Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive.
It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar.....
Cubic inches is like Indiana Jones with a cheap pistol.
|