The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68C15 · 06-09-2004, 07:55 PM

try this. takes 2 guys.
thread a 5/16 tap into tube, clamp vise grip on top of tap, have buddy hold vise grip straight out while you go underneath with a straight prybar & small hammer. hold prybar against visegrip & tap on end of bar. works about 50% of the time but worth a try.
just did the same thing on a olds powered front wheel drive motorhome today.

06-09-2004, 07:55 PM	#4
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	try this. takes 2 guys. thread a 5/16 tap into tube, clamp vise grip on top of tap, have buddy hold vise grip straight out while you go underneath with a straight prybar & small hammer. hold prybar against visegrip & tap on end of bar. works about 50% of the time but worth a try. just did the same thing on a olds powered front wheel drive motorhome today. __________________ Man rule #77...if you own a 67 stepside with a caddy 472 you will never be in danger of loosing you man card