The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - How are others finishing behind seats with no gas tank?

AcampoDave · 10-09-2019, 07:34 PM

I kept it low buck but decent. First i put the sound deadener stick on stuff covering around 60%, then jute pad, the carpet runner from Home Depot. My bottle jack lives in the cab corner and they are covered by block off panels made of heavy carboard which I painted black and attached fiberglass ductwork insullation to the backsides with spray adhesive. I used the adhesive on the back wall to keep the jute and carpet up too. I wasn't sure how to work around the old flanges on the wall for the tank straps so i just cut a little flap in the carpet. The glue came loose there, but I don't care.

10-09-2019, 07:34 PM	#4
AcampoDave Registered User Join Date: Feb 2013 Location: central California Posts: 2,731	Re: How are others finishing behind seats with no gas tank? I kept it low buck but decent. First i put the sound deadener stick on stuff covering around 60%, then jute pad, the carpet runner from Home Depot. My bottle jack lives in the cab corner and they are covered by block off panels made of heavy carboard which I painted black and attached fiberglass ductwork insullation to the backsides with spray adhesive. I used the adhesive on the back wall to keep the jute and carpet up too. I wasn't sure how to work around the old flanges on the wall for the tank straps so i just cut a little flap in the carpet. The glue came loose there, but I don't care. Attached Images Last edited by AcampoDave; 10-09-2019 at 07:42 PM.