The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 11-13-2019, 11:10 PM

A little more progress. The parts have been blasted and primed. The bed of the ramp truck makes for a nice paint surface. I welded up 3 bad spots to day on the cab. The air vents had rust in the bottom of them. I took metal and cut out the rust and welded in pieces. The drivers side floor has a little rust so I welded it up to.

Still have a bunch to do. I ordered a new 3 row aluminum radiator last week off E bay. it came in damaged and they sent me another one and said to keep the other one. No questions on it, can't beat that customer service.

11-13-2019, 11:10 PM	#50
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... A little more progress. The parts have been blasted and primed. The bed of the ramp truck makes for a nice paint surface. I welded up 3 bad spots to day on the cab. The air vents had rust in the bottom of them. I took metal and cut out the rust and welded in pieces. The drivers side floor has a little rust so I welded it up to. Still have a bunch to do. I ordered a new 3 row aluminum radiator last week off E bay. it came in damaged and they sent me another one and said to keep the other one. No questions on it, can't beat that customer service. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.