The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Andy4639 · 11-14-2019, 07:34 PM

Would you meet me part of the way if I was to come that way say to summit racing are some other place?

Could you send me some pictures?

I went over today and did some welding and tearing a part the doors to get ready for new parts I ordered last night. I was very pleased with what I got done.
My welding is getting better and better but it's still got a way's to go.

I got all the door hardware removed from both door's and even got the door latches blasted and blown off. Ready for primer. Got the glass out but have to reseal the drivers side it came out of it's brace.
Have to look and see if my old 71 window cranks will work. They look better than these do.

11-14-2019, 07:34 PM	#60
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: Daughters 68 step... Would you meet me part of the way if I was to come that way say to summit racing are some other place? Could you send me some pictures? I went over today and did some welding and tearing a part the doors to get ready for new parts I ordered last night. I was very pleased with what I got done. My welding is getting better and better but it's still got a way's to go. I got all the door hardware removed from both door's and even got the door latches blasted and blown off. Ready for primer. Got the glass out but have to reseal the drivers side it came out of it's brace. Have to look and see if my old 71 window cranks will work. They look better than these do. Attached Images __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs.