CRAP!! Another setback on my Power Distribution.... I'm so thankful for this forum and its members. Another member brought to my attention that if I used those jump terminals the way I have it setup in my wiring diagram above(see post 493) that it's going through my circuit breaker and it would most likely pop when i cranked the engine because all the power would be coming from the jump battery not mine....
So now I either need to put my jump terminals on the frame next to battery or run ANOTHER power wire up the frame rail. Or I could move the CB in front of the jump terminals but I don't want to do this because it leaves a whole lot of big wire vulnerable to melting without protection.
So here is what i'm thinking below. I also removed the fuseable link between ALT and PDU panel.
...