The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

67ChevyRedneck · 12-16-2019, 02:54 PM

The right side was a different beast. It was made up of 3 slightly twisted boards that were not the same width from end to end (one was 11.5 inches wide on one side, 11.25 on the other). I knew I was going to have to "fix" this eventually. The inside of this one will need a bit of work, but the left side was the worst.

I know it looks super bad in the pic below, but it was really only about 1/4" out, and the worst of it was the top inch or so.

12-16-2019, 02:54 PM	#1
67ChevyRedneck Hittin E-Z Street on Mud Tires Join Date: Nov 2004 Location: Greenville, SC Posts: 23,090	Re: My Big Fat Renovation The right side was a different beast. It was made up of 3 slightly twisted boards that were not the same width from end to end (one was 11.5 inches wide on one side, 11.25 on the other). I knew I was going to have to "fix" this eventually. The inside of this one will need a bit of work, but the left side was the worst. I know it looks super bad in the pic below, but it was really only about 1/4" out, and the worst of it was the top inch or so. Attached Images __________________ Jesse James 1967 C10 SWB Stepside: 350/700R4/3.73 1965 Ford Mustang: 289/T5-5spd/3.25 Trac-Loc 1968 Pontiac Firebird: Project Fire Chicken! 2015 Silverado Double Cab 5.3L Z71 2001 Jeep Wrangler Sport 4.0L 5spd 2020 Chevrolet Equinox Premium 2.0L Turbo 2011 Mustang V6 ~ Wife's ride American Born, Country by the Grace of God 1967 CST Shop Truck Rebuild! My 1967 C-10 Build Thread My Vintage Air A/C Install Project "On a Dime" Trying my hand at Home Renovation! 1965 Mustang Modifications! Last edited by 67ChevyRedneck; 12-16-2019 at 03:19 PM.