The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Inverter · 01-13-2020, 03:39 PM

Motor/trans position is slightly higher, Output shaft is 2.8 degrees, carb surface is .1 degree off level at ride height of 5 3/8”. The BB CPP mounts were a terrible fit. Took reengineering to make them fit correctly. This and also needing the extra clearance between drag link n oil pan caused the z-bar position to change. Enjoy the Handsome bracket below !

Name: E30698B4-D5BC-4495-A918-899DA78D6606.jpg
Views: 1893
Size: 39.7 KB

Name: E30698B4-D5BC-4495-A918-899DA78D6606.jpg
Views: 1893
Size: 39.7 KB

Name: BD70A78D-973F-472E-BC3D-91AD0C188947.jpg
Views: 1901
Size: 41.6 KB

Name: F50E7262-90A4-4F7C-A7DE-F623F4D01C62.jpg
Views: 1890
Size: 32.9 KB

Name: 8E9C8CC7-D9CD-491F-98D6-ACD3BE254F51.jpg
Views: 1873
Size: 54.5 KB

Name: D291E5B7-DEC3-4ECC-BF67-B80994072F83.jpg
Views: 1882
Size: 69.0 KB

01-13-2020, 03:39 PM	#22
Inverter Registered User Join Date: Mar 2007 Location: East Texas Posts: 429	Re: Anyone can buy an SWB... Motor/trans position is slightly higher, Output shaft is 2.8 degrees, carb surface is .1 degree off level at ride height of 5 3/8”. The BB CPP mounts were a terrible fit. Took reengineering to make them fit correctly. This and also needing the extra clearance between drag link n oil pan caused the z-bar position to change. Enjoy the Handsome bracket below !