[MDPotter]

Vent windows are done, doors are loaded, and front bumper is on.

I was really happy with the rubber from Classic Parts - it all fit great. But I really dislike the rivets that hold these vent windows together. We started off at a disadvantage because the rivet setting tool I ordered (the cheap punch type) is on backorder so we had to use one that has already been used on two windows. We tried welding each end to a c-clamp, but the clamp just wasn't up to the task so I just unthreaded the c-clamp and used it as a punch. It's pretty well used now. What I found works the best is to use the rivet setting tool to get it about 75% flattened out and then finish it off with a normal punch.