Re: D52 Caliper Rear Disc Brake Brackets
I had time to mess with it today and I did find out that when I remove the D52 caliper from bracket and I try to slide just the inner pad in between the bracket and the rotor I noticed that it is a tight fit but it will go in by hand.
These are the measurments that I got.
Stoptech Rotor R=32.81 and L=32.83
Raybestos Pads 15.28 and 13.80
Duralast MKD52S Pads 14.59 and 13.17
When I put the Duralast pads on it was just a little less drag but not much Also with the Duralast pads the outer pad made contact with the hub on my rotor while the Raybestos pads did not do that.
|