Re: Upside down, back to front, long low 63 fleet
Thanks for stopping by and commenting.
Busy time of year for us, havent had much time to post lately.
Bush fires are nuts.
Lots of people losing everything.
We're not really affected being in the centre of Melbourne.
Fires are not in the big cities, but the smoke in the air here is toxic.
February is traditionally peak fire season, so fingers crossed on that.
So next the engine is out and getting some attention.
Block has been cleaned up and honed.
Original flat top pistons miced up ok.
New rings, bearings, cam, lifter, timing gear, oil pump.
Heads have been cleaned up and crack and leak tested and seats cut.
Original 4 barrel manifold blasted and painted, new hei dissy.
Also tore down the trans.
New everythng inside and a transgo shift kit.
New converter with a bit higher stall to hopefully deal with the bigger cam.
Not its first rodeo so also a lot of helicoils too.
Engine is sitting back in now, hopefully forever.
Mounts are in original position on chassis rails and redrilled position on the crossmember thats been relocated forward.
|