Quote:
Originally Posted by Richard
I thought that may be the case. Hopefully someone else needs the brackets you already have. You are making me question if I am going to have clearance problems at the front of my motor due to the wide gilmer belt setup I am using. Will know in a couple of months. Cool truck build.
|
If you can modify the passenger side fire wall for clearance for the coil pack then you can slide you engine back some more. This is where I have clearance issues. As my engine sits I can pass my finger in-between the fire wall and the right side coil pack and my crank pulley is about 3/16 clear of the front cross member. My cross member is angled back some older frames are more vertical witch would give more room.