The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - DG4 Below eyeline mirrors, replacement elbows and mirror heads

**richard2717** · 02-07-2020, 06:12 PM

Randy
I have searched the assembly manual 3 times and have yet to find the 72 only DG4 mirrors. I did find the ones from 71. Would it not make sense that the top hole would be in the same spot for both mirrors, only measured from different points? In other words the 71 mirror has a measurement of 9.38 but it is on the lower line of the door. If that was brought up to the top line (squared from top edge) it looks to be about the 8.25 you mentioned here because of the taper back of the front edge on the door.

Here is a real clear drawing of the 71 DG4 mirrors

.

02-07-2020, 06:12 PM	#44
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 9,923	Re: DG4 Below eyeline mirrors, replacement elbows and mirror heads Randy I have searched the assembly manual 3 times and have yet to find the 72 only DG4 mirrors. I did find the ones from 71. Would it not make sense that the top hole would be in the same spot for both mirrors, only measured from different points? In other words the 71 mirror has a measurement of 9.38 but it is on the lower line of the door. If that was brought up to the top line (squared from top edge) it looks to be about the 8.25 you mentioned here because of the taper back of the front edge on the door. Here is a real clear drawing of the 71 DG4 mirrors . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.