Re: I.D. this gas pedal?
I got the D and F pins swapped to convert my truck harness to a car pedal. The pedal now works as it should. I took some pictures. I had a dental tool that I got years ago to pick bearing seals and it worked very well. I removed the grey wire guide by releasing clips on the ends. The purple piece comes out by releasing clips on the ends. The seal comes out by picking it with the tool. The two wires come out by releasing their tabs while pulling the wire. They just slide back in being sure to keep the same way up so they latch in.
Last edited by bigmoe; 02-09-2020 at 04:47 PM.
Reason: add more
|