Thread
:
BBC piston to valve clearance
View Single Post
02-13-2020, 09:33 AM
#
4
C101971
Registered User
Join Date: Jul 2018
Location: Calgary
Posts: 53
Re: BBC piston to valve clearance
Quote:
Originally Posted by
AussieinNC
Stock lower end with stock pistons, I use the basic rule of thumb for minimum clearances is 0.080 for the intake and 0.100 for exhaust. I usually clay test at least one cylinder on each bank.
Much more important with these engines is coil bind at max lift.....I assume you will be using new springs....
If you buy a roller cam, by the kit that also includes recommended springs and follow the installation instructions to the letter.
Yes I will be using new springs, I just didn't want to base everything off stock springs
C101971
View Public Profile
Find More Posts by C101971