Quote:
Originally Posted by slammed57
I have a trick flow cam 270/276 lsa 112. I was going to go with a cam from straub 280/288 lsa 109 ( should be more of a radical idle for what Iam looking for) both cams are hydraulic. as for a carb , I have a demon 750 that i had rebuilt a few years back but Iam goin with a 850 carb from the guys over at AED.
current set up
454 .60 over 4.310 bore 2 main block
4.00" eagle crank 4340
egale 4340 rods
trick flow rollers ( but going instead with morel rollers)
280 trickflow aluminum heads oval ports
single plane intake oval (but goin to get a dual plane on it for better street manners)
balancer ( i still need to get but not sure which to get)
probe pistons right around 11:1 compression
|
Just a concern, that big of a carb for the compression ratio may run a bit rich.