[Gregski]

Volumetric Efficiency VE Table Calibration

and that's all there's to it to disable the MAF and run in what the cool kids call Speed Density mode (pronounced: only using the VE Table)

at this point just save your file (you don't have to do Save As) since we want these changes in our 01 - VE Calibration - Setup file

then write / Flash these changes to the PCM

and just as with the MAF we don't want to stay in this tune for days, weeks, months, this is just for like a 20 or 30 minute drive with controlled throttle changes and staying out of WOT