The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Two is easier then one 1965 GMC S/W/BB build

Robert Haas · 02-26-2020, 10:23 PM

So I got the mill back up and was able to get to the part ready to be bored for the 7 instruments it will hold. I showed a picture of the cool part of my mill where I can swing the x/y axis and cut tapers. That allowed me to machine the sides at the 7 degrees from vertical.
Name: 20200226_173637.jpg
Views: 528
Size: 92.8 KB

Name: 20200226_173637.jpg
Views: 528
Size: 92.8 KB

Name: 20200226_141020.jpg
Views: 521
Size: 38.6 KB

Name: 20200226_082326.jpg
Views: 510
Size: 72.4 KB

Name: 20200226_081209.jpg
Views: 513
Size: 23.8 KB

Name: 20200226_081202.jpg
Views: 517
Size: 40.2 KB

02-26-2020, 10:23 PM	#388
Robert Haas Registered User Join Date: Mar 2014 Location: Salinas Ca. Posts: 625	Re: Two is easier then one 1965 GMC S/W/BB build So I got the mill back up and was able to get to the part ready to be bored for the 7 instruments it will hold. I showed a picture of the cool part of my mill where I can swing the x/y axis and cut tapers. That allowed me to machine the sides at the 7 degrees from vertical. __________________ Our 1965 GMC big block pro mod build http://67-72chevytrucks.com/vboard/s...d.php?t=746098