Quote:
Originally Posted by argonaut
It would be awesome if you could get reference numbers front and rear. I usually like to get a measurement from a fixed point on the axle up to the frame, to avoid discrepancies with tires sizes and wear...but fender heights are definitely appreciated and better than nothing!  |
OK, I will try and get you that info.
I will try and get a measurement from the top of the axle tube to the bottom of the frame, front and back. I'll also try and get a lip height from the centerline of the axle to the lip on the fender(s)
I'll do it this way so that the tire diameter doesn't come into play.
I can only measure one side of the truck because it's pushed up tight against a wall, but my truck sits very level so that shouldn't be an issue.