The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 ONE MORE TIME!!!! put down what you are working on in your questions.

mr48chev · 03-21-2020, 11:40 PM

I've made this request before but one more time. When you ask a technical mechanical question about something take the time to write down exactly what you are working with.

If it is a stock 1/2 ton AD truck with closed drive state that, If it is a stock 3/4 ton state that. Tell/remind us what engine, trans or rear or brakes you are working on no matter how many times you have posted about the truck and don't assume that we remember.

If you are working on or hunting a part for something that has been swapped out remind us of what you are working on. That gets the right guys answering the question, gets the right answers and no one has to assume what you have and after 30 minutes of our time doing research making sure our answer is correct find out that you were working on something different than what we thought you had.

03-21-2020, 11:40 PM	#1
mr48chev Registered User Join Date: Jul 2007 Location: Toppenish, WA Posts: 15,348	ONE MORE TIME!!!! put down what you are working on in your questions. I've made this request before but one more time. When you ask a technical mechanical question about something take the time to write down exactly what you are working with. If it is a stock 1/2 ton AD truck with closed drive state that, If it is a stock 3/4 ton state that. Tell/remind us what engine, trans or rear or brakes you are working on no matter how many times you have posted about the truck and don't assume that we remember. If you are working on or hunting a part for something that has been swapped out remind us of what you are working on. That gets the right guys answering the question, gets the right answers and no one has to assume what you have and after 30 minutes of our time doing research making sure our answer is correct find out that you were working on something different than what we thought you had. __________________ Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around.